 |
A4 Press for flat objects | |||
|
|
The Press for printing flat objects A4 (23 x 33 cm) with upper lever
closure. It has a robust mechanical construction with adjustable clamping
pressure of the printed object UIt enables the printing of textiles, ceramics, metal ... up to a thickness of 15mm Small compact size, simple operation, lower weight The digital electronic unit measures time (adjustable 0 - 999sec) and controls the temperature of the heating element (adjustable 0 - 225 C). Settings are made simply using the cursor keys. |
|
||
e-shop
/ A4  |
||||
|
Liberek spol. s r.o. - Liberek spol. s r.o. - Liberek spol. s r.o. - Liberek spol. s r.o - Liberek spol. s r.o. - Liberek spol. s r.o. - Liberek spol. s r.o -- Liberek spol. s r.o. - Liberek spol. s r.o. - Liberek |
||||
| Specific features | ||||
|
|
||||
|
|
UNPACKING THE T-SHIRT PRESS
The Press is packed in a cardboard box and fixed with foam padding. Open the lid of the box and pull out the entire press including the foam linings to the side (or up)  Finally, remove the 220V mains cable The power of the press is 1000W, so connect the press separately (not via multiple socket) to a 220V socket |
|||
|
PRESSURE ADJUSTMENT |
PRESSURE ADJUSTMENT With the press turned off, adjust the pressure according to the thickness of the printed object. The press enables the printing of objects with a maximum thickness of 15 mm Adjust the press by turning the rose (nut) as shown on th picture. Make sure that after setting the press has the pressure you want. 
 |
|||
|
TEMPERATURE TIME / SETTING
|
TEMPERATURE TIME / SETTING
Plug the press into the socket. The power consumption of the press is approx. 800W, i.e. use a socket in which no other appliance is already connected. Turn the press on with the rocker switch and set the temperature / time if needed. Please check the e-shop before printing, where there are recommended temperatures / times for each printable item Control unit settings : * Press the UPPER SET button ( SETTEMP ) and use the up/down cursor button to select the preset temperature (e.g. 180 °C). It is not recommended to use a temperature above 200 °C * Press the LOWER SET (SETTIME) button and use the up/down cursor button to select the standard time ( (e.g. 60 sec). 
 |
|||
|
PRINTING |
PRINTING After setting the temperature and time, the Press starts to heat up. If the temperature reaches the set value (not signaled), place the object on the base plate with the image fixed to the printed object and place a Teflon cover film over the top and close the Press. By closing the Press, the set time starts to count down After the set time has elapsed, an acoustic signal will sound. Open the Press and remove the printed object ! If you are not using the press, always not only switch it off, but also disconnect it from the mains (e.g. by pulling it out of the socket ! |
|||
| Technical specifications | ||||
|
|
||||
| Functions | Digital adjustment of temperature and time, adjustable pressure | |||
| Operat. conditions | Temperature 5 do + 400 C | |||
| Power requirements | 110 / 220V, 50Hz, max 800 -1.000 W | |||
| Dimensions (WxHxD) | 350 x 300 ( 430mm open Press ) x 430 mm | |||
| Weight | 16,5 kg | |||
| Color | Black / red | |||
| Accessories | Mains cord | |||
| Certification | CE certificate | |||
| The press A4 | eshop Press A4 | |||
|
|
||||
