Color photo printer CP-D707DW

 

 


CP-D707DW is new original TWO-ROLLS professional Photo Printer
by Mitsubishi. Two printing units (same as CP-D70DW) are built in single chassis. This concept has following advantages :

*  One can install to printer 2 rolls for example width 15cm
   and 13cm and print 3 formats - 10x15 / 15x20/23 and 13x18cm
  or
  one can install 2 rolls of the same format a print faster
                     photo 10x15cm is printed during  5.9 sec !
                     photo 15x20cm is printed during 10.6 sec !

*  Glossy & matte optional finish of photo (standard paper)

For optimal mechanical balance of printer, max. usage of power supply, both units prints with phase shift, similair way like for example twin-cylinder combustion engine.
Printer is equipped with fast USB 2.0, all photo print sizes 10x15, 13x18, 15x20 / 23 cm  for instant digital prints, resolution 300 DPI.
It prints (same as CP-D70DW) on paper rolls capacity 400 prints (10x15cm), 230 prints (13x18cm), 200 prints (15x20cm), 200 prints (15x20cm).

 ..... format   15x20cm  for  0.23 EUR   without VAT

         
                   
   

        E-shop 
         
   
 
 
 
   

Mitsubishi Electric Changes for the Better - Mitsubishi Electric Changes for the Better - Mitsubishi Electric Changes for the Better - Mitsubishi Electric Changes for the Better - Mitsubishi Electric                                  
                                Specific features
VIDEO
Print speed

paper CKD746
4 x format
10x15cm
 
Front / rear panel



 

 


       
   

 
Consumables





  

 


       
   

 		 There are folowing types of paper / ink media :

CK-D746  pack consist of 2 rolls + inksheet for 2x 400 prints 10x15cm
CK-D757  pack consist of 2 rolls + inksheet for 2x 230 prints 13x18cm
CK-D768  pack consist of 2 rolls + inksheet for 2x 200 prints 15x20cm
CK-D769  pack consist of 2 rolls + inksheet for 2x 180 prints 15x23 cm

 Consumable price-list for CP-D70DW





Installation of paper is thanks to new mechanical design very easy, see picture below		                                        
Easy paper
installation
in 4 steps



  

 




       
   



                                       
     
Change of print size 10x15 to 15x20 /23



   
   

 		 If you use standard media CK-D746 / 10x15, which has ink sheet
for max. size of prints 10x15cm and you need to print out
format 15x20 / 23, please exchange only ink sheet inside of
printer  = paper roll (width 15cm) is identical like paper roll
in media pack CK-D768 (15x20).

It is very suitable to purchase additional (optional) ink sheet
cassette with installed ink sheet, so change of print sizes is question of seconds, see picture  ... one has to open front door and to pull out one cartridge and to push second one  inside = very fast procedure.


 		            
      
    
Installation of paper 13x18











      
   

 		 To install paper roll width 13cm CK-D757 to printer (photo format 13x18), please put plastic spacers (width 1 cm) on both paper flanges first (spacers are standard accesorry of printer) and later insert paper flanges to sides of paper roll as shown on the picture (this way whole assy incl. both spacers has the same outside dimensions like the one with paper roll width 15cm and fits to printer).



To keep paper precise in direction during higher speeds, operator has to shift snap-in plastic paper guides to proper position. In case of roll width 13cm, move both guides to the center, see the picture.




 		                   
Driver options
WIN  XP / Vista /
Win 7 (32x64) 
    























 		 Paper Size :
setting of print size acc. to installed media inside printer :

9x13cm  / 3,5x5"    this format is not supported
10x15cm  / 4x6"     CK-D746
13x18cm  / 5x7"     CK-D757
15x20cm  / 6x8"     CK-D768
15x23cm  / 6x9"     CK-D769

Aside these basic formats, printer driver (since version 1.04 *) enables to split paper sheet  into several print sizes (for panaroma prints etc), please see picture  -

 10x15 x2 Type1     CK-D768/769
10x15 x2 Type2     CK-D768/769
This option fits in case you need to print size 10x15 (2 pcs) from media 15x20 (23) 

5x15 x2 Type1     CK-D746
5x15 x2 Type2     CK-D746
This option fits in case you need to print size 5x15 (2 pcs) from media 10x15.

Type 1 .. if you send file (picture 10x15) from computer to printer, printer cuts paper size 10x15 automatically  into 2 photos 5x15 ... it means you must prepare before composition of 2 photos placed on one layout 10x15  ( this is necessary when your graphical program is unable to send 2 different images simultaneously to print)

Type 2 .. in this case you can have 2 different files prepared with dimension 5x15 and you can send both simultaneously to printer - printer prints 2 photos 5x15 using only one paper sheet 10x15.

 * firmware upgrade is necessary

        























 






(Print pixel .. information about print resolution for selected media)




- selection of orientation Portrait / Landscape 

 - Output place - determination if print job will be done
at lower or upper unit. AUTO sends print job to both units simultaneously  (if there is installed the same format of paper in both units) 


- optional setting of number of printed copies, which will be  automatically printed after button PRINT is pressed at WIN application

- optional enlargement of printed image scale 25-400%



- bar indicator of remaining amount of ink sheet at upper /
  lower printing unit (actually installed new media 400 prints)
 		        


    
   





















 

 


- setting of sharpeness, softer or sharper outlines (-3 to +3)


 - selection of finish, if you check option
 Print finish =  Matte
than printer prints slower 4th lamination panel, which gets more matt surface.

 - Print Speed (print quality) , if you select SuperFine
(recommended mode), machine prints with resolution
2 x 300 DPI  (sharper details) 

 Mate / Superfine .. please note, you can use both functions
 only you have at your printer installed firmware version 1.0.6  
 and simultaneously you have to use new WIN / MAC driver    
  version 2.0.1        !                                                            

- basic color correction R / G / B

-  Color matching - color calibration of printout follows
   preset ICC curve








 

                          i  
Color settings aside
ICC curve  























 





Color adjustments of all colors together (Same),
or one can adjust individually each color R / G / B 

RGB gamma - basic (rough) setting of saturation or setting of one
color tone (-5 to +5)

Gentle adjustment of brightness (Same) or separate brightness
of colors R / G / B -
-128 to +128


Gentle adjustment of contrast (Same) or separateof contrast
of colors R / G / B - 
-128 to +128











 

 

                     

    
   
 		 Optional creation of specific gamma curve - individual color
adjustment of one color even at selected grade of color tone.

 

 

    
                              Specifications
Print method thermosublimation print, 16.7 mil. colors,  paper packs CK-D746, CK-D757, CK-D768, CK-D769
Resolution



 
300 DPI, thermal head 11.8 dots / mm

format 9x13  (CK-D735 - 3.5x5")  1076 x 1568
format 10x15 (CK-D746 - 4x6")    1228 x 1864 pixels
format 13x18 (CK-D757 - 5x7")    1568 x 2128 pixels
format 15x20 (CK-D768 - 6x8")    1864 x 2422 pixels   
format 15x23 (CK-D769 - 6x9")    1864 x 2730 pixels 
Print sizes / printing speed


 

format  9x13        127x89 mm  / FINE    7.7 sec   parallel print 5.4 sec       
format 10x15       152x102 mm / FINE   8.4 sec                      5.9 sec
format 13x18       127x178 mm / FINE  12.7 sec                     9.4 sec
format 15x20       152x203 mm / FINE  14.5 sec                    10.6 sec
format 15x23       152x230 mm / FINE  15.9 sec                    11.7 sec      
 
Memory
Interfaces USB 2.0
Operat. conditions temperature 5 to + 400 C, rel. humidity 30%-80% (without condensation), flat surface +- 50 to the horizontal   
Power requirements 120/220V, 50/60Hz, for 220V app. 2,6 A during priniting, standby 15W, sleep mode 0,5 W  
Power consumption 277 x 341 x 449 mm 
Dimensions (WxHxD) 22 kg
Weight light grey
Accessories Power cable, User Manual, 2x Ink cassette, 2x paper flanges, 2x paper strip bin, 2x paper catcher, spacer, CD with the drivers
XP / Vista -WIN 7 (32 + 64 bit)  / manual pdf,  cable fixation set
 CP-D707DW     1.520 EUR  Export price without VAT
Option :   
  Ink cartridge
   CP-D707DW		     10,4 EUR  spare cassette for ink sheet - suitable for quick exchange of print size - with  exchange of cassettes (not paper)
                    one can change for example print size 10x15 to 15x20.
  Roll Holder
    CP-D707DW		     55,6 EUR set of paper roll holders - for fast exchange of roll width 15cm x roll 13cm.
   
Consumables  
  CK-DXXX     Consumables  price-list
    DOWNLOAD  
    DRIVER		     Drivers WIN / MAC / firmware         
   
     DOWNLOAD  
     ICC		                                                           
                                                                CPD707.ICC      (ICC profile,  size 1,6 MB)       
 
    DOWNLOAD       Czech version .pdf                              English version .pdf                                German version .pdf 
                                                                 Leaflet   (1.6 MB)                                          Leaflet     (797 KB)
  Upon request                                          User Manual   (4.9 MB)                                 User manual  (949 KB)  Liberek spol. s r. o.