New paper CK-K76R(HG) replaces CK-K76R

      

 
 



      
 

                  
                           


 


   
 


Mitsubishi has prepared new
HIGH GRADE paper for the printer CP-K60DW-S, which replaces the existing paper CK-K76R.
The new 10x15 / 15x20cm paper name is CK-K76R(
HG)

New paper increases the print homogeneity - much better light grey ( or transition white-grey ) backgrounds !

 



 


 


 


UPGRADE FROM OLD PAPER TO NEW ONE  

For max simplicity, new paper can be used in existing printers without any change -  the printer prints !

However, if you want to use a higher print quality (recommended), 2 steps are necessary

1/  Installation of new driver version 3.0
2/ firmware upgrade (printer)

To perform a new driver installation and firmware upgrade remotely (over the Internet)
- please contact Liberek, we will assist you through TeamViewer

 

 
1/   NEW DRIVER VERSION 3.0  ( FOR PRINTER CP-K60DW-S )
 

You can download new driver for WIN 7, 8, 10 /  32 & 64bit   :    

Download driver 3.0 WiN 7/8/10
Driver Guide WIN ( EN )

You can download new driver for MAC / OS 10.6 - 10.12  

Download driver 3.0 MAC/OS
Driver Guide MAC/OS ( EN )

You can upgrade driver immediately, even you have old paper CK-K76R still on stock. Driver upgrade doesnt effect the print quality of CK-K76R.  

                      
                     






 
Options

Set option "Print Speed / Media Type" to new paper !

Sharpness:
Setting of sharpeness, softer or sharper outlines (-3 to +3)
 
Print Speed / Media Type :
Setting of speed = print quality and simultaneously setting of old paper ( called non-HG) or new HG paper


Fine / HG = std print quality to new paper CK-K76R (HG)
UltraFine / HG = high print quality to new paper CK-K76R (HG)

Fine / Non-HG = std print quality to old paper CK-K76R
UltraFine / Non-HG = high print quality to old paper CK-K76R

Print finish:
Selection of finish, if you tick option
Print finish =  Matte than printer prints slower 4th lamination panel, which gets more matt surface.


Color correction:
Optional basic color correction R / G / B

Color matching :
Color matching - color calibration of printout follows
preset ICC curve
 

          
ICC curve
setting

















 

Applicable to CK-K76R

If you have ticked at previous menu COLOR MATCHING
(colors follow installed ICC) you need to load the appropriate ICC curves ::

CPK60_ST ( ICC for standard print mode FINE )
CPK60_UF ( ICC for print mod ULTRAFINE)

and simultaneously you have to set selected ICC at COLOR MANAGEMENT menu.
To use the highest quality print mode, please
" Set
as default profile 
CPK60_UF
   !

Applicable to CK-K76R(HG)

CPK60_FINE_HG ( ICC for standard = FINE print mode )
CPK60_UF_HG    ( ICC for ultrafine mode )


Download ICC profile CPK60_FINE_HG.ICC      
Download ICC profile CPK60_UF_HG.ICC
    
 
    

 
2/   NEW FIRMWARE VERSION 1.05  ( FOR PRINTER CP-K60DW-S )
 

You can download new firmware - pls note, firmware upgrade must be performed from WIN PC ( not MAC OS )    

Download  firmware 1.05
Firmware Guide ( EN )

if you have stock of older CK-K76R, use it and upgrade new firmware when you switch to new paper !